![](https://fifthavegreenhouse.com/wp-content/uploads/2024/07/How-do-you-clean-your-bong-without-alcohol-or-vinegar.jpg)
How do you clean your bong without alcohol or vinegar?
Nobody likes to see a disgusting, dirty bong. In addition, you should clean your bong regularly. Bong is essential for pure and delicious hits.
To effectively clean a bong, you really only need two things: something acidic and something abrasive.
Most people default to using isopropyl alcohol or vinegar to clean their bong, but it is not necessary.
Have you ever needed to clean your bong but didn't have any alcohol or vinegar on hand?
Don’t worry, there are several alternative ways to make your glass bong shine again.
Today we will show you how to clean resin from your bong using different methods without alcohol or vinegar, so you can choose the method you like best.
Bong cleaning materials
Before you start the cleaning process, you need to get some things. Here is the list of all the items you will be using.
Choose your favorite bong cleaning products:
Dishwashing liquid.
Lemon juice.
Glass cleaner like Formula 420.
Nail polish remover or acetone.
Cleaning tablets for dentures.
You will also need some bong cleaning supplies:
Clean water.
Sink, basin or large container.
Rubber bong plugs or cotton balls.
Sealable plastic bags or some kind of plastic container with a lid.
Pipe cleaners with barbs, cotton swabs or a bottle brush
Latex or disposable plastic gloves.
Hand towel
How do you clean your bong without alcohol or vinegar?
There are five alternative methods to clean resin from a glass bong without using rubbing alcohol or vinegar.
1. Dishwashing liquid
Regular dish soap + hot water is perhaps the simplest but most effective way to remove dirt and keep your bong fresh and clean.
The heat from the hot water helps soften and dissolve resin residue, making it easier to remove.
First, empty the water chamber and disassemble the bong. Then fill your bong with hot (not boiling) soapy water and let it sit for a few minutes. Clean each part individually with warm soapy water and a brush.
Pay attention to hard to reach areas like percolators or downstems. Once everything is clean, rinse the bong with hot water to remove any soap residue.
2. Lemon juice
The acidity of the lemon juice helps dissolve greasy resin and other things. Baking soda acts as an abrasive that helps scrub away residue.
You can use either the juice of a fresh lemon or the small bottles of lemon juice concentrate that you can buy at the supermarket. Both work well!
And as a bonus, it leaves behind a lovely, fresh lemon scent for you to enjoy at your next session!
To clean a bong with lemon juice and baking soda, fill the bong halfway with lemon juice and spoon in a few tablespoons of baking soda.
Be sure to cover the openings with your hands, otherwise the mixture will start to bubble.
3. 420 Glass Cleaner
In addition to the do-it-yourself method for bong cleaning, there are special bong cleaning products.
Glass cleaners typically contain a mixture of alcohol and an abrasive such as kosher salt.
These are ideal for removing cannabis oil and resin from glassware, ceramics and even silicone bongs.
One of the cheapest options is Formula 420 glass cleaner, which is non-toxic, biodegradable and safe.
It's been around for years and is the preferred affordable option for many stoners. It works in five minutes or less!
And more importantly, it smells great and leaves a fresh citrus taste.
4. Nail polish remover or acetone
A little-known substitute for alcohol is nail polish remover (or acetone). It is readily available in drugstores and beauty shops.
While it is not as strong as isopropyl alcohol, with a little effort it is quite effective.
Acetone is very good for removing resin. Then simply clean with hot soapy water.
Acetone is disgusting. But if you clean it afterwards with hot water and dish soap, there won't be any residue or odors left behind. If possible, buy odorless acetone.
5. Denture cleaning tablets
Just like they dissolve plaque on dentures, they can also help dissolve resin and particles on your dirty bong.
All you have to do is put 2 or 3 denture tablets into the chamber of the bong and then fill it with hot water.
Allow the denture tablets to cool slightly for about 15-30 minutes while they bubble.
Then rinse the bong thoroughly with water. When rinsing, use a bottle brush to clean any remaining dirty areas.
This is an easy and inexpensive way to clean your bong.
Step-by-step instructions for cleaning your bong without alcohol or vinegar
Follow these simple steps to clean your glass bong:
Step 1: Remove head and downstem
Remove the shell and downstem and place them in separate, sealable storage bags.
Using different bags ensures that the two parts are not damaged or broken and allows for a more thorough cleaning.
However, you can put both parts in one bag if you handle the parts carefully.
Step 2: Drain old water
Pour out any remaining water from your bong. Wear latex or dishwashing gloves to prevent bacteria from stagnant bong water from getting onto your skin.
Step 3: Add detergent
Add the basic cleaning supplies – dish soap, lemon juice, 420 glass cleaner, acetone or denture tablets – and fill the bong chamber, each container and each bag.
Make sure that the bong chamber and bong parts are wetted with the combined cleaning agents.
Step 4: Add Abrasive
Add a few tablespoons of the abrasive (coarse salt, rice or baking soda) to each plastic bag or container to help remove any residue.
Step 5: Close and shake
To ensure no cleaning agent leaks, make sure all plastic bags or containers are tightly sealed.
When cleaning the stem of the bong, you must close all holes with either your hands, rubber stoppers or cotton balls and then shake vigorously.
Put on your favorite song and shake the bong for several minutes to loosen and remove any deposits.
Step 6: Rinse thoroughly
Empty the cleaning solution and rinse the bong with warm water until all residue is removed.
If you are dissatisfied with the cleanliness because residue has stuck to the parts, a more thorough spot cleaning is required.
Hold the bottle brush, plastic scraper or cotton swab in such a way that you can reach into all the little crevices of the bong and scrape off the residue, being careful not to scratch the glass.
After removing the resin, clean the glass with soap and water and dry thoroughly.
Step 7: Dry the bong
If you don't plan on lighting your bong right away, let it air dry to ensure all the water evaporates.
If you plan to smoke the bong immediately after cleaning, make sure to dry all parts thoroughly with a towel to restore their shine.
How often should you clean your bong?
If your bong is not clean, you will inhale the toxins and bacteria from the resin buildup, which can be very harmful to your lungs.
For the best taste and a healthy smoking experience, clean your bong after a few days to a week of use.
You also need to change your bong water frequently, ideally after each smoking session, to prevent the formation of mold spores and bacteria.
Diploma
Hold your Bong Cleanliness is essential for an optimal and healthy experience.
The main goal of the entire process of cleaning your bong is to dissolve this buildup as much as possible so that you can wipe it clean.
Dish soap, lemon juice, 420 glass cleaner, acetone, and denture tablets are all useful alternatives that can dissolve stubborn resin deposits and leave your bong sparkling clean.
Remember to rinse your bong thoroughly after using any of these alternative methods to ensure no residue or cleaning agents remain.
Some alternative methods may not be as effective as using rubbing alcohol, so you may need to repeat the process or use additional cleaning techniques if the resin deposits are stubborn.
We hope this informative guide has given you some useful tips and tricks for thoroughly cleaning your glass bong without alcohol or vinegar.
Post a comment: